Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

This is only applicable for Multiple Filters Counter Gadget with Green to Red and Red to Green board color only.

Introduction

The Counter Gadget has 2 additional special options to change the background color automatically based on the value. The colour is useful to indicate health level like Green for healthy and Red for warning.

You can select the Board Color option

  • Green to Red - For scenarios like tracking number of tickets exceeding SLA

  • Red to Green - For scenarios like number of project tasks completed

In additional, you can configure the Color Change Limit (%) to adjust the behaviour of how the counter background colour changes with respect to the value of the counter.

Color Change Limit % Setting

The Color Change Limit is defined using 2 numbers separated by a comma (E.g. 50,50).

  • The 1st percentage indicates the position to display Green color. All values smaller than this percentage will display with Green background

  • The 2nd percentage indicates the position to display Red color. All values greater than this percentage will display with Red background

  • All values between the 2 percentages will have a color in between Green and Red depending on their relative position

The Color Change Limit % setting is optional. You only need to change if you want to override the default behaviour


Example Scenarios

The color of the counter will be decided depending on the percentage for counter value.

For example, if the counter value is 6, and max value is set at 10, a color will be calculated based on value of 60% between Green and Red as shown below.

Default

When left blank, the Color Change Limit is set at 0,100 by default.

Example 1

The Color Change Limit is set at 20,100 so the color change only ranges between green to red from 20% to 100%.

This is useful when you want the colour to start changing when it exceeds a healthy level

Example 2

The Color Change Limit is set at 50,90 so the color change only ranges between green to red from 50% to 90%.

This is useful when you have a specific healthy and critical levels that you want to maintain

Example 3

The Color Change Limit is set at 20,20 so the color will not have a color change range.

This is especially useful when you need a strictly Red/Green or On/Off scenario

  • No labels