General
This is applicable for counters with Green to Red and Red to Green board color only.
Users can configure the Color Change Limit (%) to modify color thresholds for the counters.
2 numbers separated by a comma should be provided (E.g. 50,50).
...
Examples
The color of the counter will be decided depending on the percentage for counter value.
...
When left blank, the Color Change Limitis set at 0,100 by default and the counter color would range between green to red from 0% to 100%.
...
In this case, the Color Change Limitcan be set at 20,100 so that it ranges between green to red from 20% to 100%.
...
In this case, the Color Change Limitcan be set at 50,90 and the counter will range between green to red from 50% to 90%.
...
In this case, the Color Change Limitcan be set at 20,20. The counter will only be either green or red.
...